Sony MHC-RXD3/GRX20 Operating Instructions Manual page 24

Recording CDs by specifying the
track order (continued)
Selecting tape length
automatically
— Tape Select Edit
You can check the most suitable tape length
for recording a CD. Note that you cannot use
Tape Select Edit for discs containing over 20
tracks.
3
1
Place a CD on the disc tray.
If the disc number you want to record is
not displayed, press DISC SKIP/
EX-CHANGE repeatedly so that it
appears.
2
Press FUNCTION repeatedly until
"CD" appears in the display.
24
DISC SKIP/
2
EX-CHANGE
1
3
Press EDIT once so that "EDIT"
flashes.
The required tape length for the
currently selected CD appears, followed
by the total playing time for sides A and
B respectively.
Note
You cannot use this function after programming.
In order to use this function, you must first erase the
program (see "Clear the entire program" in the table
on page 21).