Sony MHC-RXD3/GRX20 Operating Instructions Manual page 21

6
To program additional tracks,
repeat steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press CD (P (or CD ( on the
remote).
All the tracks play in the order you
selected.
To cancel Program Play
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
To
Check the program
Clear a track from
the end
Clear a specific
track
Add a track to the
program
Clear the entire
program
Press
CHECK on the remote
repeatedly. After the last
track, "CHECK END"
appears.
CLEAR on the remote in
stop mode.
CHECK on the remote
repeatedly until the
number of the track to be
erased appears, then press
CLEAR.
1 Select a disc tray with a
DISC 1 – 3 button.
2 Select the track by
pressing = or +
repeatedly.
3 Press ENTER/NEXT.
p once in stop mode or
twice while playing.
Tips
• The program you made remains in the CD player
even after it has been played back. Press CD (P
to play the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20, or
– the total playing time has exceeded 100 minutes.
21