Sony MHC-RXD3/GRX20 Operating Instructions Manual page 11

1
Press 6 OPEN/CLOSE and place
up to two CDs on the disc tray.
If a disc is not placed properly, it will not
be recognized.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
To insert a third disc, press DISC SKIP/
EX-CHANGE to rotate the disc tray.
2
Press one of the DISC 1 – 3 buttons.
The disc tray closes and play starts.
If you press CD (P (or CD ( on the
remote) when the disc tray is closed,
play starts from the CD loaded on the
disc tray whose number is displayed.
Disc tray number
SYNC
ALL 1 DISCS PROGRAM
SHUFFLE REPEAT 1
Track number
Playing time
VOLUME
STEP ß
To Do this
Press p.
Stop play
Press CD (P (or P on the
Pause
remote). Press again to resume
play.
Go to the next During play or pause, press
+ (to go forward) or = (to
track or go
back to the go back).
start of the
current track
Press and hold down ) or
Find a point in
0 during play and release it
a track
at the desired point.
Select a CD Press DISC 1 – 3 or
in stop mode DISC SKIP/EX-CHANGE.
Play only the Press PLAY MODE repeatedly
CD you have until "1 DISC" appears.
selected
Play all CDs Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Press 6 OPEN/CLOSE.
Remove the CD
Exchange other Press DISC SKIP/
CDs while EX-CHANGE.
playing
Adjust the Turn VOLUME (or press
volume VOL +/– on the remote).
Tips
• Pressing CD (P when the system is off
automatically turns the system on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD (P or DISC 1 – 3 (Automatic Source
Selection).
• If there is no CD in the player, "CD NO DISC"
appears in the display.
11