Removing The Filter; Technical Data; Tips For Energy Saving - DeLonghi Dinamica Plus ECAM370.85.S Manual

To replace the filter later, press
bol appears on the display to remind you that the filter needs
replacing. To replace, proceed as follows:
1. Extract the tank (A17) and exhausted filter;
2. Remove the new filter from the packaging;
3. Access the menu as described in section "6.1 Access the
settings menu";
4. Follow the operations described in the previous section
from point 3.
The filter is now active and you can use the coffee machine.
Please note!
After two months (see date indicator) or when the appliance has
not been used for 3 weeks, you should replace the filter even if
the message has not yet been displayed.

15.3 Removing the filter

If you want to use the appliance without the filter (D7), you
must remove it and notify the appliance of its removal. Proceed
as follows:
1. Extract the tank (A17) and exhausted filter;
2. Access the menu as described in section "6.1 Access the
settings menu";
3. PRESS "WATER FILTER";
4. Press the selector corresponding to " REMOVE WATER
FILTER";
5. "CONFIRM FILTER REMOVAL": press
press
6. "FILTER REMOVED": the change has been saved. Press
to go back to the homepage.
Please note!
After two months (see date indicator) or when the appliance has
not been used for 3 weeks, you should replace the filter even if
the message has not yet been displayed.

16. TECHNICAL DATA

Voltage: 220-240 V~ 50-60 Hz max. 10 A
Power:
Pressure:
Water tank capacity:
Size LxDxH:
Cord length:
Weight:
Beans container capacity:
Frequency:
Maximum transmission power
. The
to go back to the settings menu);
1450 W
1.9 MPa (19 bars)
1.8 l
240x440x360 mm
1750 mm
10 kg
300 g
2400/2483.5 MHz
10 mW

16.1 Tips for Energy Saving

sym-
• Do not attach the accessories to the steam connection noz-
zle (A8) until needed for the beverage to be made. After
delivery, remove the accessory. (After delivering bever-
ages with milk, always clean the milk container (E) before
removing);
• Set auto-off to 15 minutes (see paragraph "6.7 Auto-off
(standby)
• Enable Energy Saving (see paragraph "6.8 Energy saving
");
• When requested by the machine, perform the descaling
cycle.
(or
18
"):