Table of Contents
Advertisement
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
1
Disconnect the AC outlet.
2
Reconnect the AC outlet.
3
Press ?/1 to turn on the system.
4
Press x, CLEAR and DISPLAY on the unit
at the same time.
The system is reset to the factory settings. You
should set the settings you made, such as the
preset stations, clock, and timer.
Messages
One of the following messages may appear or
flash in the display during operation.
NO DISC
There is no disc in the disc slot.
OVER
You have reached the end of the disc while pressing
M during playback or pause.
PROTECT
Press ?/1 (power) to turn off the system. Turn on
the system again after a while.
If the problem persists after doing above, consult
your nearest Sony dealer.
PUSH STOP
You pressed PLAY MODE/DIRECTION during
play.
STEP FULL
You tried to program 26 or more tracks (steps).
GB
37
Hide quick links:
Advertisement
Table of Contents
