Table of Contents
Advertisement
Playing a tape
You can use TYPE I (normal) tape.
1
Press TAPE to switch the function to
TAPE.
2
Press PLAY MODE/DIRECTION on the
unit repeatedly to select "g" to play
one side of a tape, "h" to play both
sides, or "j"* to play both sides
repeatedly.
* The tape deck stops automatically after
repeating the sequence five times.
3
Press nN.
appears for the front side, and
>>>
the reverse side.
Other operations
To
Play the reverse
side
Stop play
Pause
Fast-forward or
rewind
Remove a tape
Note
If the system stops during tape playback or recording
due to a power failure or other reason, do not attempt
to forcibly eject the tape as this may damage the heads.
Wait until the power is restored, then be sure to press
?/1 to turn on the system before ejecting the tape.
GB
22
Tape playback side
Do this
Press nN again during play.
Press x.
Press X. Press again to resume
play.
Press m or M.
Press Z PUSH on the tape deck in
stop mode.
Tape – Recording
Recording on a tape
You can record just the portions you like from a
disc on a tape. You can also record a radio
program.
CD Synchro Recording
1
Load a recordable tape.
2
Press TAPE, then press nN
repeatedly to select recording side.
3
Press CD.
4
Press DISC + or – (or turn DISC
SELECT on the unit) to select the
desired disc to record.
5
Press CD SYNC on the unit.
for
<<<
Tape deck stands by for recording.
6
Press PLAY MODE/DIRECTION on the
unit repeatedly until "g" appears to
record on one side or "h" (or "j")
to record on both sides.
7
Press REC PAUSE/START on the unit.
Recording starts.
Other operations
To
Stop recording
Pause recording
To record a disc by specifying
track order
You can record only your favorite disc tracks
using Program Play. In step 4, perform steps 3 to
5 of "Creating your own program" on page 16.
When programing, make sure the playing times
for each side do not exceed the length of one side
of the tape.
Do this
Press x.
Press REC PAUSE/START
on the unit.
Hide quick links:
Advertisement
Table of Contents
