Change The Heat Or Cool Mode - Uponor Climate Control Manual

Change the heat or cool mode

This feature allows you to set the mode for all the thermostats in the air zone, or all the thermostats in your system
regardless of which air zone they are in.
Another option is to use Auto Mode to control the heating and cooling equipment. In Auto Mode, the system uses
the thermostat setpoints and temperatures to determine whether the system should be in heat or cool mode. At
your discretion, you can force the system into heat or cool mode. When the weather conditions permit you might
prefer to turn the system off. When the system is off, equipment will only respond to make adjustments if extreme
heat or cool temperatures are detected by the system. (These extreme temperatures are set during installation.)
To change the mode for the zone:
1. Click the button.
2. Click the Air Zones tab.
3. Click an air zone.
4. Click the Mode Settings tab.
5. Click the radio button next to mode you want to use.
To change the mode for all the thermostats in the system:
1. Click the button.
2. Click the Air Zones tab.
3. Click an air zone.
4. Click the Mode Settings tab.
5. Click the radio button next to mode you want to use.
6. Click the Apply to all thermostats in system button.
Note: The Air Zones tab and all related Air Zone features only appear for systems that contain air zones. If your
system does not include air zones, see Change the heat or cool mode for all thermostats.
27