Playing A Tape - Sony MHC-BX9 Operating Instructions Manual

3
Press Z and insert a recordable tape
into deck B.
With the side
you want to
record facing
forward
4
Press REC PAUSE/START.
Deck B stands by for recording.
5
Press DIRECTION repeatedly to
select g to record on one side.
Select j (or RELAY) to record on
both sides.
6
Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
Tips
• If you want to record from the reverse side, press
TAPE A/B to select deck B after step 1. Press
nN to start playback of the reverse side, then
press x where you want to start recording. TAPE
B reverse side indicator lights up (see page 16).
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, use + and – (or
TUNING +/– on the remote) in step 2 to tune in
the desired station manually.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that "DOLBY NR" appears after pressing REC
PAUSE/START in step 4 (MHC-BX9/DX9 only).
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.

Playing a tape

You can use TYPE I (normal) tape. You can
also use the ./> (AMS* function)
button to quickly search for songs you want
to hear. To select either deck A or B, press
TAPE A/B repeatedly.
* AMS (Automatic Music Sensor)
?/1
1
(Power)
2
x
X
.
hH S
l L
j J
H S
3
DOLBY NR
4 2
>
nN
x
s
.>
mM
s
1
VOL +/–
continued
15