Sony MHC-BX2 Operating Instructions Manual page 11

To Do this
Stop playback Press x.
Pause Press X. Press again to resume
playback.
Select a track During play or pause, press
> (to go forward) or .
(to go back).
Find a point in Turn the shuttle clockwise
a track (to go forward) or
counterclockwise (to go
back) until it clicks and hold
(or press and hold down M
or m on the remote).
Release it when you find
the desired point.
Select a CD Press a DISC 1~3 button or
in stop mode DISC SKIP EX-CHANGE (or
DISC SKIP on the remote).
Play only the Press PLAY MODE
CD you have repeatedly until "1 DISC"
selected appears.
Play all CDs Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Remove the CD Press Z OPEN/CLOSE.
Exchange other Press DISC SKIP
CDs while EX-CHANGE.
playing
Adjust the Turn VOLUME (or press VOL
volume +/– on the remote).
Tips
• You can switch from another source to the CD
player and start playing a CD just by pressing one
of the DISC 1~3 buttons (Automatic Source
Selection).
• If there is no CD in the player, "CD NO DISC"
appears in the display.
11