Operation; Maintenance - Makita 6823 Instruction Manual

1
1. Lock button

OPERATION

MAINTENANCE

8
Removing removable cord adapter
004181
Rotate the Removable Cord Adapter counterclockwise until it stops while
pressing the lower part of the lock button.
Then pull the Removable Cord Adapter in that position.
004182
Fit the screw on the point of the bit and place the point of the screw on the sur-
002673
face of the workpiece to be fastened. Apply pressure to the tool and start it.
Withdraw the tool as soon as the clutch cuts in. Then release the switch trig-
ger.
CAUTION:
• When fitting the screw onto the point of the bit, be careful not to push in
on the screw. If the screw is pushed in, the clutch will engage and the
screw will rotate suddenly. This could damage a workpiece or cause an
injury.
• Make sure that the bit is inserted straight in the screw head, or the screw
and/or bit may be damaged.
CAUTION:
• Always be sure that the tool is switched off and unplugged before
attempting to perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspec-
tion and replacement, any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always using Makita
replacement parts.