Acqiris U5309A User Manual page 64

7.2 How to calibrate the card?
Group Category
Acquisition
A Channel parameters
B Trigger
External reference
C
Clock mode
Driver interfaces and functions
The interfaces/methods/properties (functions/attributes) listed below are provided by the Acqiris MD3
driver. Please refer to AqMD3.chm (IVI-C) or Acqiris.AqMD3.Fx40.chm (IVI.NET) for detailed help.
IVI-C
Functions
AqMD3_SelfCalibrate
AqMD3_CalibrationLoadFromFile
AqMD3_CalibrationSaveToFile
Attributes
AQMD3_ATTR_CALIBRATION_IS_REQUIRED
IVI.NET
Interface
IAqMD3Calibration
64
Parameter
Sampling rate
Vertical range
Input filter Bypass (Yes/No)
Trigger source
Reference mode (External or
Internal Reference)
External clock frequency
Clock source
Method / Property name
IsRequired
SelfCalibrate
SaveToFile
LoadFromFile
Calibration required
Only the 1st time, for an identical set of parameter
values
Only the 1st time
Each time this parameter changes
Each time this parameter changes
Each time this parameter changes
U5309A User's Manual