Compaq ProLiant ML330 Series White Paper page 15

Compaq ProLiant ML330 G2 Service Overview
Step
Processor socket 1 (populated)
Processor socket 2
PPM 2 slot
Raise the processor socket lever
6.
shown below:
The guide posts and directional key marks on the socket must be aligned with the
corresponding slots and marks on the processor.
Lower the processor socket lever, as shown below:
7.
Secure the heatsink retainer clip on the back of the processor to the socket, as shown
8.
Rev. 1.0
Action
2
1
, and then place the processor into the socket
15
, as
Page 15 of 20