Adjusting The Handle Height; Adjustment Of Brake Effect - Invacare DOLOMITE Jazz Series User Manual

3.9 Adjusting the Handle Height

Stand behind the rollator. The handles should normally be positioned
at wrist height.
Loosen the handlebar by pushing the locking lever (A) upwards and
then adjust the handles to a suitable height. Lock the handlebars by
pushing the handle slightly downwards, a distinct "click" is heard
when the handle is locked in it's position. Repeat the procedure on
the other side.
A

3.10 Adjustment of Brake Effect

If braking effect is poor adjust the brake cable. Suitable tools to use
are fixed spanners, 8 mm for adjustment and 10 mm for the locking
nut (not included).
WARNING
Make sure to tighten the lock nuts after adjustment.
38