Advertisement
Inclusion/Exclusion for Devices using a Generic Device Wizard
Step 1
Select Devices and click on the
Add Device option.
After adding a new device, the VeraEdge Controller will ask you to name it and choose the room it is (or will be) located in.
Note: If the device was previously included with a different Z-Wave system, you'll need to it exclude it before adding with your VeraEdge.
(You may also need to do this if you have problems Inclusion/Exclusion the first time.) Press the Retry button to start the exclusion pro-
cess. Once the device is excluded, add it by following the inclusion steps.
Step 2
Click on the "+" sign for the device's category.
A list of Vera Custom Device Wizards is dis-
played. If your specific device is not shown,
select the "Generic Device" option.
Step 3
Follow the steps in the Device Wizard
to add the device.
Advertisement
