Advertisement
Inclusion and Exclusion
Your VeraEdge Controller can work with all
Z-Wave devices, such as sensors, alarms,
door locks, thermostats, etc. Over a thou-
sand Z-Wave devices are available from
many brands. (Z-Wave is a wireless com-
munications system; check the package or
specs to see if a device uses Z-Wave.) Before
VeraEdge can control a device, it must be
included into the Vera system.
Vera Custom Device Wizards are available
for select devices that pass stringent Vera
Labs testing for compatibility and quality.
The Custom Device Wizards make Inclusion/
Exclusion easiest, with specific details for
each device.
A list of these devices is available and
updated at
http://getvera.com/compatibility/
For all other Z-Wave devices, a
Generic Device Wizard is used for Inclu-
sion/Exclusion. A Generic Device Wizard is
available for each device category (thermo-
stats, sensors, alarms, etc.)
To get started, after setting up your
VeraEdge Controller, use the Vera UI to
select Devices and then Add Device
(Figures 1-1 & 1-2).
Figure 1-1:
Add Device
Figure 1-2:
Device Paring menu
Advertisement
