Kärcher BR 45/22 C Manual page 11

 Add detergent using the dosing lid.
One capful corresponds to a 1% ap-
plication.
Recommended detergents:
Application
Regular cleaning
(even for floors sensi-
tive to alkalies)
Basic cleaning (strip-
ping) of alkali-resistant
hard coatings
Basic cleaning (strip-
ping) linoleum
Base cleaner, acidic
Disinfection cleaning RM 732
Detergents are available in specialised
stores.
 Close the dosing lid of the fresh wa-
ter reservoir.
Settings
 Release the star knob for the height
adjustment of the steering wheel.
 Adjust the steering wheel to the de-
sired height.
 Tighten the star handle.
 Adjust the dosing of the cleaning
solution in accordance with the soil-
ing and the type of the flooring ma-
terial.
 Adjust the rotary handle of the
brush contact pressure to the de-
sired value.
Detergent
RM 745
RM 746
RM 752
RM 754
RM 751
EN
Only adjust the brush contact pres-
sure when the cleaning head is
raised.
Note:
If the appliance pulls forwards too
strongly during operation, reduce the
contact pressure.
 Bring the Eco mode switch into the
desired position.
Normal operation: The appliance
works at the maximum brush speed
and the highest suction perfor-
mance.
Eco: The appliance works at re-
duced brush speed and suction
performance. This also reduces the
energy consumption. The possible
working time increases with one
charging cycle.
Park support
Lowering the park support
 Press the steering wheel downward
so that the appliance lifts up to-
wards the front.
The park support swivels down-
wards.
 Release the steering wheel.
The appliance is standing on the
park support.
The roller brush is unloaded and is
protected from deforming.
Lifting the park support up
 Push the appliance forwards.
The part support swivels upwards.
– 9
11