Changing The Display; Using The Sleep Timer - Sony HT-DDW700 Operating Instructions (HTDDW700 Home Theater System) Operating Instructions Manual

Changing the display

You can check the sound field, etc., by
changing the information on the display.
Be sure to use the button on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows.
All inputs except the FM and AM
band
Index name of the input* t Selected input t
Sound field currently applied
FM and AM band
Preset station name* t Frequency t Sound
field currently applied
*
Index name appears only when you have assigned
one to the input or preset station (page 46, 47).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
48 US

Using the Sleep Timer

You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
1-30-00 t 1-00-00 t 0-30-00
2-00-00 t
t OFF
When Sleep Timer is being used, "SLEEP"
lights up on the display.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.