Advertisement
S688A
SPECIFICATIONS INSTALLATION ORDERING INFORMATION
MODEL S688A Sail Switch.
ELECTRICAL RATINGS (Amperes):
,, N.0. Contacts
24
Full
12.0
Rotor
Resistive
SAIL DATA:
Insertion length-10 in. [254 mm].
Maximum width-5 in. [127 mm].
Approximate area-26.2 in.
F L O W
AIR
Contacts:
Makes-250 @m.
Breaks-75 fpm.
Makes-75 fpm.
Breaks-250 fpm.
WHEN INSTALLING THIS PRODUCT...
1. Read these instructions carefully. Failure to follow
them could damage the product or cause a hazardous condi-
tion.
2. Check the ratings given in the instructions and on the
product to make sure the product is suitable for your applica-
tion.
3. Installer must beatrained,experienced service techni-
4. After installation is complete, check out product op
eration as provided in these instructions.
purchasing replacement and modernization products from your TRADELINE@ wholesaler
When
TRADELINE Catalog or price sheets for complete ordering number, or specify—
1. Order number, TRADELINE, if desired.
If you have additional questions, need further infonnatio~ or would like to comment on our products or services, please write or phone:
1. Your local Honeywell Residential Sales Office (check white pages of phone directory).
2. Residential Division Customer Satisfaction
Honeywell Inc., 1885 Douglas Drive North
Minneapolis, Minnesota 554224386 (612) 542-75(XI
In Canada-Honeywell Limited/Honeywell Lirnitee, 740 Ellesmere Road Scarborou~ Ontario M 1P 2V9. International Sales and
Service Offices in all principat cities of the world. Manufacturing in Australi~ Canada, Finland, France, Germany, Japan, Mexico,
Netherlands, Spa Taiwan, United Kingdom U.S.A.
24 120 240
120
240
1.0 0.5
1.0
1.0
12.0
6.0
6.0
6.0
2.5
2.5
2
[1690 mmz].
MAXIMUM AMBIENT TEMPERATURES:
125° F [52° C] at switches.
170° F [77° C] at sail.
CASE DIMENSIONS: 2-5/16 in. [59 mm] high, 3-3/4 in.
[95 mm] wide, 2-1/8 in. [54 mm] deep.
DUCT MOUNTING HOLE DIMENSIONS: 1-1/2 in.
[38 mm] by 2-1/4 in. [57 mm].
MOUNTING MEANS: Switch mounts on return air duct
3.0
with two sheet metal screws. An adhesive backed mount-
ing template is provided. Sail is inserted into duct through
1-1/2 in. [38 mm] by 2-1/4 in. [57 mm] hole.
2.5
MOUNTJNG POSITION: Mounts in vertical (up or down)
or horizontal airflow.
KNOCKOUTS: 1/2 in. conduit knockout in either
end of ease.
FINISH: Zinc plated case and cover.
REPLACEMENT PARTS: Part no. 123773A Replacement
sail.
UNDERWRITERS' LABORATORIES, INCL LISTED:
File No. E4436, Guide No. XAPX. For use in ambient
temperatures normally prevailing in oecupiable spaces,
which usually are not higher than 77°
occasionally may be as high as 104° F [40° C] for brief
periods.
Disconnect power supply before beginning install-
damage.
LOCATION
Locate the sail switch in the return air duct where the sail
will be in the direct path of an unrestricted air stream.
Maximum ambient temperature at the switch is 125°
[52° C] and at the sail is 170°
Ordering Information
2
Specifications
[25° C] but
F
Installation
[77° C]. The air duct at the
F
or your distributor, refer to the
F
Advertisement
