Download Print this page

Safeguarding The Environment - Whirlpool AKP3840PIXAUS Health & Safety And Installation Manual

Multi-function pyrolitic oven

Advertisement

ELECTRICAL WARNINGS
For installation to comply with
current safety regulations,
an omnipolar switch with
minimum contact gap of 3 mm
is required and the appliance
must be earthed.
If the power cable is damaged,
replace with an identical one.
The power cable must only
be replaced by a qualified
technician in compliance with
the manufacturer instruction
and current safety regulations.
Contact an authorized service
center.
It must be possible to
disconnect the appliance
from the power supply
by unplugging it if plug is
accessible, or by means of an
accessible multi-pole switch
installed upstream of the socket
in conformity with national
electrical safety standards.
The rating plate is on the front
edge of the oven (visible when
the door is open).
In case of replacement of power
cable, contact an authorized
service center.

SAFEGUARDING THE ENVIRONMENT

DISPOSAL OF PACKAGING
MATERIALS
The packaging material is 100%
recyclable and is marked with the
recycle symbol
. The various parts
of the packaging must therefore be
disposed of responsibility and in
full compliance with local authority
regulations governing waste disposal.
SCRAPPING OF HOUSEHOLD
APPLIANCES
When scrapping the appliance, make
it unusable by cutting off the power
cable and removing the doors and
shelves (if present) so that children
cannot easily climb inside and
become trapped.
This appliance is manufactured with
recyclable
or reusable materials.
Dispose of it in accordance with local
waste disposal regulations.
4
If the fitted plug is not suitable
for your socket outlet, contact a
qualified technician.
The power cable must be
long enough to connect the
appliance, once fitted in its
housing, to the
main power supply. Do not pull
the power supply cable.
Do not use extension leads,
multiple sockets or adapters.
Do not operate this appliance
if it has a damaged mains cord
or plug, if it is not working
properly, or
if it has been damaged or
dropped. Keep the cord away
from hot surfaces.
The electrical components must
not be accessible to the user
after installation.
Do not touch the appliance
with any wet part of the body
and do not operate it when
barefoot.
CLEANING AND
MAINTENANCE
Never use steam cleaning
equipment.
For further information on the
treatment, recovery and recycling
of household electrical appliances,
contact your competent local
authority, the collection service for
household waste or the store where
you purchase the appliance.
This appliance is marked in
compliance with European Directive
2012/19/EU, Waste Electrical and
Electronic Equipment (WEEE).
By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product.
The symbol
on the product or on
the accompanying documentation
indicates that it should not be treated
as domestic waste but must be taken
WARNING: Ensure that the
appliance is switched off before
replacing the lamp to avoid the
possibility of electric shock.
Do not use harsh abrasive
cleaners or sharp metal scrapers
to clean the appliance door
glass since they can scratch the
surface, which may result in
shattering of the glass.
Remove all accessories before
running the pyrolytic function
(also the lateral grids).
Wear protective gloves for
cleaning and maintenance.
The appliance must be
disconnected from the power
supply before any maintenance
operation.
Ensure the appliance is cooled
down before carrying out
any cleaning or maintenance
operation.
If the oven is installed below
a hob, make sure that all
burners or electric hotplates
are switched off during the
selfcleaning (pyrolytic) function.
to an appropriate collection center
for the recycling of electrical and
electronic equipment.
ENERGY SAVING TIPS
Only preheat the oven if specified in
the cooking table or your recipe.
Use dark lacquered or enamelled
baking moduls as they absorb heat
far better.
Standard cycle (PYRO): which is
suitable for cleaning a very dirty oven.
Energy-saving cycle (PYRO EXPRESS/
ECO) - only in some models -: which
consumes approximately 25% less
energy than the standard cycle.
Select it at regular intervals (after
cooking meat on 2 or 3 consecutive
occasions).

Advertisement

loading