Specifications - Sony GX20 Operating Instructions Manual

Sony operating instructions owner's record mini hi-fi component system mhc-gx40, gx30, gx20, mhc-rg110, rg33, rg22, mhc-rl3
Table of Contents

Advertisement

Precautions (continued)
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
Be sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
a separately sold dry-type or wet-type cleaning
cassette. For details, refer to the instructions of the
cleaning cassette.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
GB
28

Specifications

AUDIO POWER SPECIFICATIONS:
(MHC-GX40/GX20 USA model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohms loads both channels driven, from
120 – 10,000 Hz; rates 60 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
Total harmonic distortion less than 0.07%
Amplifier section
North American models:
MHC-GX40
Front speaker
Continuous RMS power output (reference)
Total harmonic distortion less than 0.07%
Sub woofer
Continuous RMS power output (reference)
Total harmonic distortion less than 0.07%
MHC-GX30
Continuous RMS power output (reference)
Total harmonic distortion less than 0.07%
MHC-GX20
Continuous RMS power output (reference)
Total harmonic distortion less than 0.07%
(6 ohms at 1 kHz, 30 W)
60 + 60 watts (6 ohms at
1 kHz, 10% THD)
(6 ohms at 1 kHz, 30 W)
120 watts (12 ohms at
40 Hz, 10% THD)
(12 ohms at 40 Hz, 60 W)
75 + 75 watts (6 ohms at
1 kHz, 10% THD)
(6 ohms at 1 kHz, 40 W)
60 + 60 watts (6 ohms at
1 kHz, 10% THD)
(6 ohms at 1 kHz, 30 W)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents