Advertisement
Location and Function of Parts and Controls
Front
9 DEGAUSS button
!º SYNC INT/EXT (sync
internal/external) selector
!¡ LINE/RGB input selector
!™ A/B, RGB/Y R-Y B-Y
input selector
!£ BLUE ONLY selector
!¢ UNDER SCAN selector
!∞ H/V DELAY selector
!§ 16:9 selector
!¶ R/G/B BIAS and GAIN adjustment controls
1 Tally lamp
This indicator lights up. The tally control connection is
needed.
For the pin assignment, see "Specificatons" on back
cover.
2 POWER switch and indicator
Depress to turn the monitor on. The indicator will light
up in green.
The POWER indicator also functions as the battery
indicator. When the internal battery becomes weak or
the power supplied through the DC 12 V IN jack
decreases, the indicator flashes.
3 VOLUME control
Turn this control clockwise or counterclockwise to
obtain the desired volume.
4 CONTR (contrast) control
Turn clockwise to make the contrast stronger and
counterclockwise to make it weaker.
5 PHASE control
This control is effective only for the NTSC color
systems. Turn clockwise to make the skin tones
greenish and counterclockwise to make them purplish.
6
1 Tally lamp
2 POWER switch and indicator
3 VOLUME control
4 CONTR (contrast) control
5 PHASE control
6 CHROMA control
7 BRIGHT (brightness) control
8 APER (aperture) control
6 CHROMA control
Turn clockwise to make the colour intensity stronger
and counterclockwise to make it weaker.
7 BRIGHT (brightness) control
Turn clockwise for more brightness and
counterclockwise for less.
8 APER (aperture) control
Turn clockwise for more sharpness and
counterclockwise for less.
Notes
• The PHASE, CHROMA and APER control settings
have no effect on an analog RGB signal.
• The PHASE control has no effect on component
signals.
• The PHASE control setting is effective only for the
NTSC system.
9 DEGAUSS button
Press this button momentarily. The screen will be
demagnetized.
Note
If you press the DEGAUSS button again too soon, the
color shades may be uneven.
Advertisement
