Auto Run Function; Auto Mode Selection & Running - JPS PDA Series Instruction Manual

12. AUTO RUN Function

12.1 Auto Mode Selection & Running
TABLE OF PARAMETERS USED FOR AUTO MODE.
PARAMETER
Pr.72
Pr.73
Pr.74
Pr.75
Pr.76
Pr.77
TABLE OF AUTO MODE FUNCTIONS
Pr.72 AUTO FUNCTION DESCRIPTION
0 NO AUTO FUNCTION
1 STEP RUN & MAINTAIN SPEED
2 STEP RUN, STOP & REPEAT
3 STEP RUN, STOP & CHANGE DIRECTION REPEAT
4 STEP RUN, & REPEAT
5 STEP RUN, & CHANGE DIRECTION REPEAT
6 SIMILAR TO MODE 4, BUT REPEAT FROM STEP2
Pr.72 = 1 STEP RUN & MAINTAIN
STEP1 inverter running as if JOG command is applied.
Pr.73 (JOG_PERIOD) determines time.
STEP2 inverter running as if SPD1 command is applied.
Pr.74 (SPD1_PERIOD) determines time.
STEP3 inverter running as if SPD2 command is applied.
Pr.75 (SPD2_PERIOD) determines time.
STEP4 inverter running as if SPD3 command is applied.
Pr.76 (SPD3_PERIOD) determines time.
STEP5 inverter running at specified MAIN speed as if it is in normal mode.
Pr.00
Pr.21
Pr.24
Pr.27
Pr.19
Pr.73
Example speed pattern of AUTO STEP RUN Type 1
Pr.72 = 2 STEP RUN, STOP & REPEAT
STEP1 inverter running as if JOG command is applied.
Pr.73 (JOG_PERIOD) determines time.
STEP2 inverter running as if SPD1 command is applied.
Pr.74 (SPD1_PERIOD) determines time.
STEP3 inverter running as if SPD2 command is applied.
Pr.75 (SPD2_PERIOD) determines time.
STEP4 inverter running as if SPD3 command is applied.
Pr.76 (SPD3_PERIOD) determines time.
STEP5 inverter running as if STOP command is applied.
Pr.77 (HALT_PERIOD) determines time.
AFTER STEP5, REPEAT FROM STEP1.
Pr.21
Pr.24
Pr.27
Pr.19
Pr.73
Example speed pattern of AUTO STEP RUN Type 2
FUNCTION
AUTO MODE SELECT
AUTO STEP 1(or 6) JOG_SPD_PERIOD
AUTO STEP 2(or 7) SPD1_SPD_PERIOD
AUTO STEP 3(or 8) SPD2_SPD_PERIOD
AUTO STEP 4(or 9) SPD3_SPD_PERIOD
AUTO STEP 5(or 10) MANI_SPD_PERIOD
Pr.75 Pr.76
Pr.74
Pr.74 Pr.75 Pr.76 Pr.77
time
REPEAT
46