Table of Contents
Advertisement
22.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
23.
Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
24.
When servicing a tool, use only identical replacement parts. Follow
instructions in the "Inspection, Maintenance, And Cleaning" section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
1.
WARNING!
grounded, 3-Prong Plug (not included). For safety purposes, only a qualified,
certified, electrician should attach a Plug to the Power Cord. Never modify the
Plug in any way. To comply with the National Electric Code, and to provide
additional protection from the risk of electrical shock, this product should only be
connected to a 220 volt electrical outlet that is protected by a Ground Fault Cir-
cuit Interrupter (GFCI).
2.
Do not use the tool if the Power Cord or Plug is damaged. If damaged,
have it repaired by a qualified service facility before use.
Grounded tools require a three wire extension cord.
1.
2.
As the distance from the supply outlet increases, you must use a heavier
gauge extension cord. Using extension cords with inadequately sized wire
causes a serious drop in voltage, resulting in loss of power and possible tool
damage. (See Figure A, next page.)
SKU 90648
90648.p65
5
SERVICE
GROUNDING
The Power Cord (11) requires the attachment of a 220 volt,
EXTENSION CORDS
PAGE 5
12/1/2003, 10:56 AM
Advertisement
Table of Contents
