Sirius Satellite Radio SILT-26 Series Installation Instructions Manual

Sirius Satellite Radio SILT-26 Series Installation Instructions Manual

Pendant rangehood
Hide thumbs Also See for SILT-26 Series:

Advertisement

Quick Links

Congratulations on your purchase!
Thank you for choosing a Sirius product.
PENDANT RANGEHOOD INSTALLATION INSTRUCTIONS
SILT-26 B
SILT-26 C
SILT-26 G
SILT-26 W
SILT-26
EAN #9351116002428
EAN #9351116001308
EAN #9351116001322
EAN #9351116001315
www.siriusbrand.com

Advertisement

Table of Contents
loading

Summary of Contents for Sirius Satellite Radio SILT-26 Series

  • Page 1 Congratulations on your purchase! Thank you for choosing a Sirius product. SILT-26 PENDANT RANGEHOOD INSTALLATION INSTRUCTIONS SILT-26 B EAN #9351116002428 SILT-26 C EAN #9351116001308 SILT-26 G EAN #9351116001322 SILT-26 W EAN #9351116001315 www.siriusbrand.com...
  • Page 2: Dear Customer

    DEAR CUSTOMER The rangehood is intended for household use only. Materials used for packaging are nature friendly and may be recycled, deposited or destroyed without any threat to the environment. In order to recognize these features, all packing materials are marked with relevant symbols. When you plan to replace your rangehood, deposit your old appliance with the authorized depot dealing with used household appliances.
  • Page 3: Technical Data

    WARNING The appliance must be installed and connected to the power supply only by a qualified technician. • There shall be adequate ventilation of the room when the range hood is used at the same time as appliancess burning gas or other fuels (not applicable to appliances that only discharge the air back into the room) •...
  • Page 4: Exploded View

    USES INSTALLATION The appliance can be arranged only for filtering At the beginning make sure that the package is intact performances. In its filtering version the air and fumes and all the parts are unbroken, otherwise stop the conveyed by the appliance are cleaned both by a installation and contact the dealer.
  • Page 5 Place the ceramic cover over the motor components Take the metal plate from the packaging and then put and insert the steel cables into the three holes of the the steel cables through the appropriate supports, as ceramic, as shown in the figure (Fig. 1). shown in Fig.
  • Page 6 Put the hood near the ceiling and hook the plate to the screws previously installed (fig.8 A) Tighten the three screws fixing the plate to the ceiling, then block the hood definitively adding the security screw, see fig.9 B. Connect the appliance to the electric grid.
  • Page 7: Operating Description

    WORKING OPERATION MODE Standard configuration: Remote control Standard configuration requires all rangehood radio 6 channel control for rangehood remote. control systems to be provided with the same transmission code. In the event two rangehoods are • When the rangehood is first turned on, hold the installed in the same room or nearby, each system lighting button for 5 seconds.
  • Page 8: Maintenance

    TIMING MAINTENANCE As a result of the new EU65 “Energy label” and EU66 An accurate maintenance guarantees good “ Ecodesign” regulations issued by the European functioning and longlasting performance. *Particular Commission, which came into force as from January care is due to the grease filter The grease filter is 1st, 2015 , our products have been adapted to fixed through magnets, therefore it is sufficient to comply with these new requirements.
  • Page 9 WORKING...

This manual is also suitable for:

Silt-26 bSilt-26 cSilt-26 gSilt-26 w

Table of Contents