Other Operations - Sony CMT-EX5 Operating Instructions Manual

Presetting radio stations (continued)
4
Press MENU/NO on the remote.
5
Press TUNING – or + (or – or + on the
remote) repeatedly until "Memory?"
appears, then press ENTER/YES on the
remote.
A preset number appears.
Do steps 6 and 7 when the preset number is
flashing.
6
Press TUNING – or + (or – or + on the
remote) repeatedly to select the desired
preset number.
7
Press ENTER/YES on the remote.
"Complete!" appears.
The station is stored.
8
Repeat steps 1 through 7 to store other
stations.
Tip
Press TUNING MODE on the remote when you want
to stop scanning.
Setting presets through
manual tuning
1
Press TUNER/BAND (or TUNER BAND
on the remote) repeatedly to select
"FM" or "AM".
2
Press TUNING MODE on the remote
repeatedly until "MANUAL" appears.
GB
14
3
Press TUNING – or + (or – or + on the
remote) repeatedly to tune in the
desired station.
4
Press MENU/NO on the remote.
5
Press TUNING – or + (or – or + on the
remote) repeatedly until "Memory?"
appears, then press ENTER/YES on the
remote.
A preset number appears.
Do steps 6 and 7 when the preset number is
flashing.
6
Press TUNING – or + (or – or + on the
remote) repeatedly to select the desired
preset number.
7
Press ENTER/YES on the remote.
"Complete!" appears.
The station is stored.
8
Repeat steps 1 through 7 to store other
stations.

Other operations

To Do this
Tune in a station Follow the procedure described in
with a weak "Setting presets through manual
signal tuning".
Stop setting Press MENU/NO on the remote in
presets step 5 or 6.
Change the Start over from step 1.
preset station