Replacing The Battery In The Remote; Setting The Clock - Sony CMT-EX5 Operating Instructions Manual

Replacing the battery in
the remote
1
Slide out and remove the battery case.
2
Insert a new lithium battery CR2025
with the + side facing up.
3
Slide the battery case back in.
Tip
When the remote no longer operates the system,
replace the battery with a new one.
Note
If you do not use the remote for a long period of time,
remove the battery to avoid possible damage from
battery leakage and corrosion.
Notes on lithium battery
• Keep the lithium battery out of the reach of
children. Should the battery be swallowed,
immediately consult a doctor.
• Wipe the battery with a dry cloth to assure a good
contact.
• Be sure to observe the correct polarity when
installing the battery.
• Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
WARNING
Battery may explode if you mistreated.
Do not recharge, disassemble or dispose of in fire.
GB
8
A lithium battery CR2025

Setting the clock

1
Turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
The day indication flashes.
3
Press . or > on the remote
repeatedly to set the day, then press
ENTER/YES on the remote.
The hour indication flashes.
4
Press . or > on the remote
repeatedly to set the hour, then press
ENTER/YES on the remote.
The minute indication flashes.
5
Press . or > on the remote
repeatedly to set the minuite, then
press ENTER/YES on the remote.
If you made a mistake
Press TCURSOR or CURSORt on the remote
repeatedly until the indication you want to change
(day, hour, minuite) flashes, and then change the
setting.
To adjust the clock
1
Press CLOCK/TIMER SET on the remote.
2
Press . or > on the remote
repeatedly to select "CLOCK SET?", then
press ENTER/YES on the remote.
3
Do the same procedures as steps 3 to 5
above.