Recording To A Tape; Cd Synchro Recording/Recording Manually - Sony CMT-EP707 Operating Instructions (CMTEP707) Operating Instructions Manual

Recording to a tape

— CD Synchro Recording/Recording Manually

You can record from a CD or radio (or connected components). You can use TYPE I (normal) tape.
Steps
1
Load a blank tape.
2
Press DISC 1 – 3 Z.
3
Load the CD you want to record.
4
Press z REC PAUSE/START.
The deck stands by for recording.
When you want to record on the reverse side, press nN.
5
Press FM MODE/DIR (REPEAT/DIR on the remote) repeatedly to select g to
record on one side, h to record on both sides.
6
Press z REC PAUSE/START again.
Recording starts.
To stop recording
Press x.
Tips
• When you record on both sides, be sure to start
from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Note
To erase a recording, remove all the CDs, press CD,
and then press z REC PAUSE/START twice.
GB
14
Recording from a CD
(CD Synchro Recording)
Recording from the radio
(or a connected component) manually
Press TUNER (TUNER/BAND on the
remote) or MD to select the desired
source to record.
Tune in the radio station (or load
another audio source) you want to
record.
Press z REC PAUSE/START again, and
then start playing the desired source.