Table of Contents
Advertisement
Erasing the titles
1 Press MENU/NO in stop mode.
2 Press . or > repeatedly until "Name ?"
appears, then press ENTER/YES.
3 Press . or > repeatedly until "Nm
Erase?" appears, then press ENTER/YES.
To erase all the titles, press . or >
repeatedly until "Nm All Ers?" appears, then
press ENTER/YES.
"Nm All Ers??" appears.
4 Press . or > repeatedly until the desired
title to erase appears, then press ENTER/YES.
To erase all the titles, press ENTER/YES again.
"Complete !!" appears and the title is erased.
To cancel erasing
Press MENU/NO.
To return to the condition before
labeling or erasing
You can return to the original condition
immediately after labeling or erasing a title by
using Undo Function on page 55.
Erasing recordings
— Erase Function
The MD deck lets you erase unwanted tracks
quickly and easily. You can restore the contents to
the condition before erasing (unerase) by using the
Undo function. Note, however, you cannot undo
an edit after performing any additional edits.
The three options for erasing recordings are:
• Erasing a single track (Track Erase Function)
• Erasing all tracks (All Erase Function)
• Erasing a portion of a track (A-B Erase
Function)
Erasing a single track
— Track Erase Function
You can erase a track simply by selecting its track
number. When you erase a track, the total number
of tracks on the MD decreases by one and all the
tracks following the erased one are renumbered.
Example: Erasing track 2.
Track
number
1
2
Original
A
B
tracks
1
2
After
A
ERASE
When erasing multiple tracks, you should proceed
in order from high to low track number to prevent
the renumbering of tracks that have not been
erased yet.
Erase track 2
3
4
C
D
3
C
D
continued
47
Hide quick links:
Advertisement
Table of Contents
