Sony CMT-CP33MD Operating Instructions Manual page 5

Jack type B
AM loop
antenna
3
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
110V – 120V
220V – 240V
VOLTAGE
SELECTOR
4
Connect the power cord to a wall outlet.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
Inserting two size AA (R6)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Insert this
portion
Notes
• If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
• Be sure to insert the batteries in correct direction.
• Do not mix new batteries with old ones.
• Do not use different types of batteries together.
• Do not use a battery that is leaking.
• If the battery leaks, clean the battery compartment
and replace all the batteries with new ones.
e
E E
e
5