Removing The Annulus Gear; Section 'D' - Axle Arm, Hub And Brake Assemblies - PRM NEWAGE 415 Series Workshop Manual

Removing the Annulus Gear

1. To remove Annulus (C10), use a pair of pinch bars, located behind the Annulus (C10) diamet-
rically opposed, in a scissor fashion to prise the Annulus clear of the Main Case bore (A3).
2. To refit, reverse procedure ensuring that the Dowel (C11) is aligned with the slot at the Top
of the Annulus (C10).
Section 'D' – Axle Arm, Hub and Brake Assemblies
Item Part No
D1 010N651
D2 010W651
D3 415-1440
D4 0540604H
D5 418-2500
D6 418-2510
D7 0081730
D8 415-2401-LH
D9 415-0035-LH
D10 0041210HTP
D11 421-0100
D12 0211225
D13 415-0450
D14 415-0041
D15 418-2540
D16 0191013H
D17 See D8/ D18
D18 415-2401-RH
D19 415-0035-RH
D20 0041210HTP
D21 415-0753
D22 0081535L
D23 0540751H
D24 417-2850V
NOTE: Quantities stated per Axle (* Denotes Left-Hand or Right-Hand Assembly parts)
Qty Description
2 Nut M65
2 Lock Washer M65
2 Spacer
2 Taper Roller Bearing
1* Service Brake (LH) (Includes Pad D6)
4 Brake Pad
4 M16 x 30 Cap Head Bolt
1* Brake Mounting Bracket (LH) (Includes Bolt D17)
1* Welded Axle Arm Assy (LH)
16 M12 x 35 Long Bolt
2 Axle Shaft
4 Dowel Ø 12 x 25
Wheel Stud ¾" x 16 UNF
12
2 Wheel Hub
1* Service Brake (RH) (Includes Pads D6)
4 Hardened Washer M16 x 4 Wide
4 Mounting Bracket Bolt (not available separately)
1* Brake Mounting Bracket (RH) (Includes Bolt D17)
1* Welded Axle Arm Assy (RH)
24 M12 x 35 Long Bolt
2 Brake Disc
16 M10 x 35 Long Cap Head Bolt
2 Taper Roller Bearing
2 Oil Seal - Viton
22