Sony CDP-CX270 Operating Instructions Manual page 24

Storing Information About CDs (Custom Files)
2
Press INPUT.
3
Turn the JOG dial until "DISC MEMO" appears in
the front panel display, then press ENTER.
The flashing cursor (") appears.
4
Turn the JOG dial until the character you want
appears in the front panel display.
The cursor disappears and the first space for the
disc title flashes.
As you turn the JOG dial clockwise, the characters
appear in the following order. Turn the JOG dial
counterclockwise to go back to the previous
character.
(space) A B C D E F G H I J K L M N O P Q R S T U
V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w
x y z 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * + , – . / : ; <
= > ? @ [ \ ] ^ _ ` { | } ⁄
ALL DISC S
S
New Artist
5
Press ENTER to select the character.
The selected character lights up, and the flashing
cursor appears to indicate the next space to be
input.
ALL DISC S
S
New Artist
If you have made a mistake
Press CLEAR and begin again by inputting the correct
characters.
6
Repeat Steps 4 and 5 to input more characters.
If you want to input other Disc Memo information
(artist name or track titles) of the same disc
sequentially
Press ENTER repeatedly until the cursor goes to the
space for the item you want, and you can input the
information.
7
Press INPUT to store the disc title.
The disc title lights up in the front panel display.
ALL DISC S
SONYHITS
New Artist
Repeat Steps 1 through 7 to assign disc titles to
other discs.
24 EN
A B
CD2
ART.
A B
CD2
ART.
DISC
9 3
CD2
ART.
Labeling discs with artist names
1
Turn the JOG dial to select the disc.
2
Press INPUT.
3
Turn the JOG dial until "ARTIST NAME" appears
in the front panel display, then press ENTER.
"New Artist" flashes in the front panel display.
4
Press ENTER.
The flashing cursor (") appears.
5
Input the artist name following Steps 4 through 7
in "Labeling discs with disc titles" on page 23.
You can select the artist name without inputting
when labeling another disc by the same artist
After pressing the ENTER button in Step 3 above, turn
the JOG dial. As you turn the JOG dial, the front panel
display shows the artist names which have been assigned
to other discs. Press ENTER to select the artist name for
the current disc.
If you correct the artist name, all discs by the same artist
will be corrected.
Labeling each track
1
Turn the JOG dial to select the disc.
2
Press INPUT.
3
Turn the JOG dial to select the track, then press
ENTER.
The flashing cursor (") appears.
4
Input the track title following Steps 4 through 7 in
"Labeling discs with disc titles" on page 23.