Creating Your Own Program (Program Play) - Sony CDP-M333ES Marketing Operating Instructions Manual

Playing CDs
Playing all tracks on a specified disc in
random order
1
Press SHUFFLE repeatedly until "1 DISC" and
"SHUFFLE" appear in the display.
2
Turn the JOG dial until the desired disc number
appears in the display.
When using the remote, first press DISC, then
press the number button of the disc.
3
Press H.
1 DISC Shuffle Play starts.
" " appears in the display while the player is
shuffling the tracks.
To cancel Shuffle Play
Press CONTINUE.
z
You can start Shuffle Play while playing
Press SHUFFLE, and Shuffle Play starts from the current
track.
z
You can go to the next disc during 1 DISC Shuffle
Play Z
Press DISC SKIP +.
z
You can specify the next disc to play during 1 DISC
Shuffle Play
Turn the JOG dial to specify the next disc. After all the
tracks on the current disc are played in random order,
the next disc starts playing. If you want to skip to the
next disc right away, push the JOG dial while playing the
current disc.
Notes
• You cannot specify the next disc to play during ALL DISCS
Shuffle Play.
• Even if you press x or turn off the player during ALL
DISCS Shuffle Play, the player remembers which discs or
tracks were played and which were not. Therefore, if you
want to start ALL DISCS Shuffle Play again from the
beginning, be sure to repeat the procedure from step 1.
16
Creating Your Own Program
(Program Play)
You can arrange the order of the tracks and/or discs to
create three different programs that are stored
automatically. A program can contain up to 32 "steps."
One "step" may contain a track or a whole disc.
You can make programs using the controls on the
remote or on the player. However, the programming
procedures are different.
CHECK
PROGRAM
I / 1
H
Creating a program on the player
1
Press PROGRAM until the desired program
number (PROGRAM 1, 2, or 3) appears in the
display.
If a program is already stored in the selected
program number, the last step of the program
appears in the display. When you want to erase the
whole program, hold down CLEAR until
"CLEAR" appears in the display (see page 17).
2
Turn the JOG dial until the desired disc number
appears in the display.
2nd NEXT DISC ART. HIT TRACK GROUP
* D I S C - 2 * 0
ALL 1 DISC S SHUFFLE REPEAT 1 GROUP
PROGRAM 1 2 3 X-FADE DELETE
MULTI CD TEXT NO DELAY CD1 CD2 CD3
3
To program a whole disc, skip this step.
Turn the . AMS > dial until the desired
track number appears in the display.
2nd NEXT DISC ART. HIT TRACK GROUP
* D I S C - 2 * 0
ALL 1 DISC S SHUFFLE REPEAT 1 GROUP
PROGRAM 1 2 3 X-FADE DELETE
MULTI CD TEXT NO DELAY CD1 CD2 CD3
CLEAR JOG
. AMS >
ART. MIN STEP SEC
* * * *
ART. MIN STEP SEC
* * * *
Track number