To Stop Playback - Sony CDP-CX53 Operating Instructions Manual

When you turn off the player
by pressing the I/u (standby
mode)
The player remembers the
last playing disc and the
play mode (Continuous,
Shuffle (see page 12) or
Program (see page 13)).
When you turn on the
player again, therefore, the
player plays the same disc in
the same play mode. Note
that the player does not
remember this information,
if you turn off the player by
pressing the power switch of
the amplifier or receiver
while the AC power cord is
connected to the switched
AC outlet of the amplifier or
receiver.
Push the JOG dial or press · to start playing.
5
The selected disc is set to the playing position, and the player
plays all the discs from the selected one (ALL DISCS) or all the
tracks once (1 DISC).
Adjust the volume on the amplifier.
Display information while playing a disc
While playing a disc, the display shows the current disc number, track
number, playing time of the track and the next disc number.
Current disc number
ALL DISC S
DISC
20
Current track number

To stop playback

Press p.
STANDBY
I / u
To
Pause
Resume playing after pause
Go to the next disc
Go back to the preceding disc
Go to the next track
Go back to the preceding track
Stop playing and remove the disc
Basic Operations
Basic Operations
Next disc number
1 2 3 4 5 6 7 8
TRACK NEXT DISC
MIN SEC
1 38
0 2 8
CD 1
Playing time of the track
Front cover
PUSH
OPEN
BLOCK
PLAY MODE REPEAT BLOCK FILE 1 2 3 4 5
PLUS ONE
· P p
You need to
Press P
Press P or ·
Press DISC SKIP + once.
Hold down the button to skip discs.
Press DISC SKIP – once.
Hold down the button to skip discs.
Press ±
Press ≠
Open the front cover, then push the JOG
dial. The disc comes to the loading
position.
JOG
DISC
PUSH ENTER
CHECK CLEAR
≠/±
9