Page 1
User's Manual ACTION-508A / ACTION-512A / ACTION-M512A / ACTION-515A ACTION-525A / ACTION-S18A / ACTION-S118A / ACTION-S218A Antes de utilizar el equipo, lea la sección “Precauciones de seguridad” de este manual. Conserve este manual para futuras consultas. Before operating the device, please read the “Safety precautions”...
Precauciones de Seguridad action-500 active series Safety Precautions Cajas acústicas activas / Self-powered loudspeaker enclosures El signo de exclamación dentro de un triángulo indica la The exclamation point inside an equilateral triangle is intended to existencia importantes instrucciones operación alert the users to the presence of important operating and mantenimiento en la documentación que acompaña al producto.
GARANTÍA Todos nuestros productos están garantizados por un periodo de 24 meses desde la fecha de compra. Las garantías sólo serán válidas si son por un defecto de fabricación y en ningún caso por un uso incorrecto del producto. reparaciones garantía pueden realizadas,...
INTRODUCTION The action 500 series inherits the exceptional sound quality and rugged build that have made DAS professional systems an internacional sound reinforcement standard. Designed from “real-world” experience, they offer users outstanding performance, absolute reliability, and unparalleled convenience. Whether it is in a high-profile venue or on the stage of a major event, the action 500 series will provide the power and definition needed to make your performance a success.
Page 7
INTRODUCTION (cont'd) INTRODUCCIÓN (cont.) ACTION-525A - 2-way powered system - 2 x 15" bass loudspeaker, 15MI (2,5" VCD) - Compression driver with titanium diaphragm, M-44 (1,75" VCD) - Two steel-reinforced handles The ACTION-525A is a powered loudspeaker (2 channel Class D amplifier), that utilizes two 15” bass loudspeakers for extra low frequency punch and higher SPL.
CONFIGURATIONS Manual del Usuario / action 500 series / User’s Manual...
Page 9
CONFIGURATIONS (cont´d) Manual del Usuario / action 500 series / User’s Manual...
Page 10
LINE LINE GAIN www.dasaudio.com AUX IN OUTPUT INPUT 1 INPUT 2 ACTION series DAS Audio Group, S.L. (Valencia) Select HPF (High Pass Filter) SUB mode in the Action-515A. TRD-2 TRD-2 ACTION-S118A ACTION series Model: ACTION-S118A-230 DAS Audio Group, S.L. (Valencia)
Page 11
LINE LINE GAIN www.dasaudio.com AUX IN OUTPUT INPUT 1 INPUT 2 ACTION series DAS Audio Group, S.L. (Valencia) Select HPF (High Pass Filter) SUB mode in the Action-525A. ACTION-S218A ACTION-S218A ACTION series Mixer Model: ACTION-S218A-230 DAS Audio Group, S.L. (Valencia)
LINE DRAWINGS ALL DIMENSIONS IN MILLIMETERS Top View Front View Left View Rear View Rear View Left View Right View Front View Bottom View Front View Right View Rear View Front View Right View Rear View Bottom View Bottom View Front View Right View Rear View...
TRD-6 TRD-6 ANL-2 Accessories TRD-7 TRD-7 TRD-7 DAS Audio Group, S.L., continuously strives to enhance its products through investigation and development. All specifications are subject to change without prior notice. Manual del Usuario / action 500 series / User’s Manual...
AMPLIFIER Description 1) MASTER VOLUMEN AND DSP CONTROL: Use the encoder to select the desired output volume and push/hold it to access to the different DSP and cabinet settings. 2) MAIN SCREEN: In the main screen all selected parameters and settings are shown.
AMPLIFIER (cont'd) ON / OFF A sound system should be switched on sequentially. Switch on the self-powered units last in your sound system (switch on the subwoofer before the mid-high system). Switch on the sound sources such as CD players or turntables, then the mixer, then the processors, and finally the self-powered unit.
Troubleshooting PROBLEM CAUSE SOLUTION sound from unit. 1 – The signal source is sending no 1 – Check that the mixer or sound SIGNAL LED does not light up. signal. source is sending signal to the UNIT. 2 – Defective cable. 2 –...
DISPLAY (except ACTION-S18A, ACTION-S118A & ACTION-S218A) ADJUSTING THE LEVELS: Notes: The only models in this series that do not By default the state of the screen is the have a display are: ACTION-S118A and ACTION- following: S218A. 0 dB In the model ACTION-M512A the preset activated by default is "Monitor"...
HPF (High Pass Filter): Two options are available for the cabinets. Go to the HPF Sub-menu and press the encoder. Options appear: MAIN MENU BACK PRESET: Live HPF: Off MAIN MENU BACK Live PRESET: HPF: Off> MAIN MENU BACK Live PRESET: HPF: <SUB...
Page 19
OPTIONS: In this sub-menu the user can configure all the non-audio related options. Remember that in order to access each parameter it is necessary to push the encoder: OPTIONS MENU OPTIONS MENU OPTIONS MENU BACK BACK BACK BRIGHT: 0 BRIGHT: BRIGHT: CONTRAST: 0 CONTRAST: 0...
Page 20
DISPLAY (only ACTION-S18A) By scrolling down the encoder more options appear: ADJUSTING THE LEVELS MAIN MENU Delay: 0.0m By default the state of the screen is the following: OPTIONS: off BACK 0 dB PRESETS: 0.0m Two factory settings (loud and deep) loud depending on the type of music/use has been configured by default:...
Page 21
OPTIONS: In this sub-menu the user can configure all the non-audio related options. Remember that in order to access each parameter it is necessary to push the encoder: OPTIONS MENU OPTIONS MENU OPTIONS MENU BACK BACK BACK BRIGHT: 0 BRIGHT: BRIGHT: CONTRAST: 0 CONTRAST: 0...
All flying accessories that are not supplied well as the safety measures to be taken during by DAS Audio are the user's responsibility. Use at set-up and teardown. your own risk.
Page 23
RIGGING (cont'd) Flying with eyebolts The Allen-head screws must be removed and replaced by M10 eyebolts on one side of the enclosure. Each rigging point has 200 kg (440 lb) working load limit. Then choose the slings or chains of required load resistance and length, bearing in mind that the length difference between the front and back slings or chains will determine the vertical orientation.
Page 24
Wall plugs provided are to be used in brick walls only. For other wall materials, source the suitable wall plug before use. DAS Audio is not responsible for use other than the recommended or whether it be the result of insufficient strength of the support structure. Use only the screws and wall plugs supplied on surfaces that will provide sufficient support.
ANNEX: Line connections: unbalanced and balanced There are two basic ways to transport an audio signal with microphone or line level: Unbalanced line: Utilising a two conductor cable, it transports the signal as the voltage between them. Electromagnetic interference can get added to the signal as undesired noise. Connectors that carry unbalanced signals have two pins, such as RCA (Phono) and ¼”...
Page 26
46988 Fuente del Jarro Miami, FL. 33166 - U.S.A. Tower #34-36 Santa Efigênia, São Paulo Valencia, SPAIN TOLL FREE: 1 888 DAS 4 USA Singapore 039190 Brasil. CEP: 01208-000 Tel. +34 96 134 0860 Tel. +65 6549 7760 Tel. +551133330764...