Product Specifications; Noise Level - Ryobi RMS254DB Original Instructions Manual

pRoDuCt SpeCIfICatIonS

Mitre saw
Model
Net weight
Blade diameter
Arbor hole
Blade teeth
Width of cut
No-load speed
Input
Power
Cutting capacity:
Mitre 0° x bevel 0°
Mitre 0° x bevel 45° (L)
Mitre 0° x bevel 45° (R)
Mitre 45° x bevel 0°
Mitre 45° x bevel 45° (L)
Mitre 45° x bevel 45° (R)
Minimum workpiece dimensions
Measured values determined
according to EN 62841
A-weighted sound pressure level
Uncertainty K
Measured values determined
according to EN 62841
A-weighted sound power level
Uncertainty K
Replacement parts
Saw blade
Kerf plate
The declared noise emission value(s) have been measured
RMS254DB
in accordance with a standard test method of EN 62841-1
17.7 kg
and EN 62841-3-9, and may be used for comparing one
tool with another.
254 mm
The declared noise value(s) may also be used in a
30 mm
preliminary assessment of exposure.
48
The noise emissions during actual use of the power tool
can differ from the declared values depending on the ways
2.8 mm
in which the tool is used especially what kind of workpiece
5500 min
-1
is processed.
220V - 240V ~ 50 Hz
Identify safety measures to protect the operator based on
an estimation of exposure in the actual conditions of use
2000 W
(taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is
running idle in addition to the trigger time).
340 mm x 80 mm
Wear hearing protection. Exposure to noise can cause
340 mm x 50 mm
hearing loss.
340 mm x 25 mm
240 mm x 80 mm
240 mm x 50 mm
240 mm x 25 mm
130 mm x 35 mm x 2.5 mm
L = 99.10 dB(A)
pA
3 dB
L = 110.28 dB(A)
WA
3 dB
089312001065
089312001144

noISe level

waRnInG