Attaching The Speaker Pads - Sony 2-661-374-11(4) Operating Instructions Manual

5 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Extend the FM lead
antenna horizontally
6 For models equipped with a voltage
selector, set VOLTAGE SELECTOR to
the position of your local power line
voltage.
Brazil model only
VOLTAGE SELECTOR
220V 127V
220V
7 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adaptor).
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in
the event of trouble.
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• (MHC-GNX880/GNX800 only)
Be sure to connect both left and right surround
speakers.
• Be sure to match the color of the speaker terminals on
the unit and the connectors.
• Be sure to connect the speakers securely and
correctly. When connecting speaker cords, insert the
connectors straight into the terminals.
To connect optional components
See "Hooking up optional components" on page 27.
GB
8
AM loop antenna
Other models
VOLTAGE SELECTOR
220V 120V
230-240V
, the system turns on
?/1
Inserting two R6 (size AA)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.

Attaching the speaker pads

Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
When carrying this unit
Do the following procedure to protect the disc
mechanism.
Use buttons on the unit for the operation.
1
Press ?/1 to turn on the system.
2
Press CD.
3
Make sure that all discs are removed
from the unit.
4
Hold down CD, then press ?/1 until
"MECHA LOCK" appears in the display.
5
Release ?/1 first, then release CD.
6
Unplug the AC power cord.