Table of Contents
Advertisement
Customizing sound fields
By adjusting the surround parameters and the
equalization of the front, center, surround, and
surround back speakers, you can customize the
sound fields to suit your particular listening
situation.
Once you customize a sound field, the changes
are stored in the memory indefinitely. You can
change a customized sound field any time by
making new adjustments to the parameters.
See the tables starting from page 85 for the
parameters available in each sound field.
To get the most from multi
channel surround sound
Position your speakers and do the procedures
described in "Multi channel surround setup"
starting from page 19 before you customize a
sound field.
Adjusting the surround
parameters
The SURROUND menu contains parameters
that let you customize various aspects of the
current sound field. The settings are stored
individually for each sound field.
1
Start playing a program source
encoded with multi channel surround
sound.
2
Press SURROUND.
The button lights up and the first parameter
is displayed.
3
Press the cursor buttons (
select the parameter you want to
adjust.
4
Turn the jog dial to select the setting
you want.
The setting is entered automatically.
Initial settings
Parameter
2CH DECODING
2CH MODE
C.WIDTH L__C__R*
DIMENSION F__I__S*
PANORAMA MODE* OFF
EFFECT LEVEL
WALL S__I__H
REVERB S__I__L
FRONT REVERB
SCREEN DEPTH
VIR.SPEAKERS
SUR.ENHANCER
BASS GAIN
BASS FREQ.
TREBLE GAIN
TREBLE FREQ.
* You can set this parameter only when the 2ch
decode mode is set to "PL II MUSIC".
2ch decode type (2CH DECODING)
Lets you specify the settings for decoding
Digital PCM, analog input, or the 2 channel
audio signals of [2/0] format sound.
• When set to "AUTO", the receiver performs the
decoding when the Dolby Surround or DTS
Surround encode flag is on.
• When set to "ON", the receiver performs the
decoding for the 2 channel source, regardless of
the encode flag.
• When set to "OFF", the receiver does not
perform the decoding.
or
) to
Note
When "NORMAL SURROUND" is selected, the
receiver is automaticallty set to "ON" setting. When
"A.F.D." is selected, the receiver automatically set to
"AUTO" setting. In either case, this parameter is not
displayed in the SURROUND menu.
Initial setting
(depends on the sound field)
PRO LOGIC
3
Midpoint
(depends on the sound field)
Midpoint
Midpoint
STD (STANDARD)
MID
ON
ON
0 dB
250 Hz
0 dB
2.5 kHz
continued
37
Hide quick links:
Advertisement
Table of Contents
