Sony STR-VA555ES Operating Instructions Manual page 69

To erase a programmed IR code
1 In step 4, move the easy scroll key to select
"Common", then press the key to enter
selection.
2 Move the easy scroll key to select "NO SET",
then press the key to enter selection.
To turn off all Sony components
(SYSTEM STANDBY)
1 In step 4, move the easy scroll key to select
"Common", then press the key to enter
selection.
2 Move the easy scroll key to select "ALL OFF",
then press the key to enter selection.
However, this function cannot be applied to
some Sony components.
To cancel programming
Move the easy scroll key to select "Exit" or
"Cancel" during any step, then press the key to
enter the selection.
Tips
• In step 6, when " " is displayed in front of the
function, the function is pre-programmed.
• In step 3 and 7, when "NO SET" is displayed after
the program number, the codes have not been
programmed.
Note
If you select "IR SET" for a component that already
has a learned button setting, the learned codes for that
component are cleared. Furthermore, if the cleared
learned button is used in a Macro Play setting, the
setting for that button will be changed to "NO SET".
Starting macro play
1
Press FUNCTION.
The function list appears.
p
2
Move the easy scroll key to select
"MACRO1" or "MACRO2", then press
the key to enter the selection.
The IR codes appear in the display window
as they are performed.
Notes
• Pressing any of the following buttons during a
macro play operation will cancel the macro play
sequence before it is complete.
– AV ?/1
– ?/1
– SYSTEM STANDBY
– SOUND FIELD
– FUNCTION
– SET UP
• When the Macro Play function does not work
properly, set "WAIT TIME" between each
operation.
continued
69