About The Indications In The Display - Sony STR-LV500 Operating Instructions Manual

About the indications in the display

1
SLEEP
LFE
SW
0
A SLEEP: Lights up when sleep timer is
activated.
B Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound (based on the speakers settings).
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SW (sub woofer)
Example:
Recording format (Front /Surround): 3/2
Output channel: Surround speakers absent
Sound Field: A.F.D. AUTO
C ; DIGITAL: Lights up when the receiver is
decoding signals recorded in the Dolby Digital
format.
D ; PL (II): "PL" lights up when a 2-channel
signal is applied with "DOLBY PL" or
C.ST.EX A–C. "PL II" lights up when Dolby
Pro Logic II processing ("PLII MOV" or
"PLII MUS") is applied. However, this
indicator does not light if the center and
surround speakers are set to "NO", and
"A.F.D. AUTO" is selected.
E D.RANGE: Lights up when dynamic range
compression is activated (page 26).
F Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 12–14 for tuner operations.
GB
16
2 3
;
DIGITAL
L C R
DTS
SL SSB SR
OPT COAX
9 8
L C R
SW SL SSB SR
4
;
PL II
7
G COAX: Lights up when the source signal is a
digital signal being input through the COAX
terminal.
H OPT: Lights up when the source signal is a
digital signal being input through the OPT
terminal.
I DTS: Lights up when DTS signals are input.
J
LFE
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
D.RANGE
STEREO MONO
:Lights up when the disc being played
5
EQ
RDS
MEMORY
6