Changing The Factory Setting Of A Input Button On The Remote - Sony STR-LV500 Operating Instructions Manual

Remote Operations
Button
./>
VCR/Hard
disc audio
recorder/
CD player/
VCD player/
DVD player/
MD deck/
Tape deck
m/M Hard disc
audio
recorder/
CD player/
VCD player/
DVD player/
MD deck
VCR/
Tape deck
V/v/B/b
VCR/Satellite
tuner/DVD
player
Notes
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
• Before you use the V/v/B/b button for receiver
operation, press MAIN MENU. To operate other
components, press TOP MENU/GUIDE or AV
MENU after pressing the input button.
Function
Skips tracks.
Searches tracks
(forward or
backward).
Fast forwards or
rewinds.
Selects a menu item.
Changing the factory
setting of a input button
on the remote
If the factory settings of the input buttons on the
remote do not match your system components,
you can change them. For example, if you have
a tape deck and you do not have an MD deck,
you can assign the HDD/MD button to your tape
deck.
While pressing one of the input buttons on
the remote (VIDEO/HDD/MD/DVD/TV/SAT/
AM/FM) you want to assign the component,
press two numeric buttons, then release
the input button.
Example: Press HDD/MD, 2, 4, then release
HDD/MD.
For the assignable components and buttons to be
pressed, refer to the table below.
To operate
While
pressing
VCR (command VIDEO
mode VTR 3*)
VCR (command VIDEO
mode VTR 2*)
Hard disc audio HDD/MD
recorder / CD player
MD deck HDD/MD
Tape deck A HDD/MD
Tape deck B HDD/MD
DVD player DVD
VCD player DVD
TV TV/SAT
DSS (Digital Satellite TV/SAT
Receiver)
Receiver (AM) AM
Tuner (AM) AM
Receiver (FM) FM
Tuner (FM) FM
* Sony VCRs are operated with a VTR 2 or 3 setting.
These correspond to 8mm and VHS respectively.
Buttons
Press Press
first second
1 3
1 4
2 2
2 3
2 4
3 1
3 2
3 3
3 4
4 1
1 1
1 2
2 1
1 2
continued
23
GB