Changing nozzles ......................13 Cooking zone burners ....................... 14 Pilot flame burners in the cooking zones ................14 Oven burners ........................14 Declaration of Conformity ....................15 ascobloc Gastro-Gerätebau GmbH D-01156 Dresden, Grüner Weg 29 Germany Tel. +49 351 4533-0...
Page 3
Hazard symbol description General hazard symbol Non-observance of the safety instructions means danger to persons (injury) or damage to the equipment Hot surfaces Contact can lead to burns ascobloc Gastro-Gerätebau GmbH D-01156 Dresden, Grüner Weg 29 Germany Tel. +49 351 4533-0...
• Several parts such as gas extraction duct, oven door, the top plate, of the range are, by their nature, very hot due to the high temperatures needed for cooking. Protect yourself by only touching the control elements provided and by wearing clothing that prevents direct skin contact. ascobloc Gastro-Gerätebau GmbH D-01156 Dresden, Grüner Weg 29 Germany Tel.
• Before repair work is started, the equipment must be disconnected on all poles from the power (using isolating equipment in the customer's supply, e.g. fuses). 3.3 Instructions for transport • Transport ascobloc equipment only in the original packaging. This avoids unnecessary damage and expense. • Check equipment for damage.
Bring all burners into operation. There is air in the lines prior to the first ignition so it takes somewhat longer till the pilot flames can be ignited. Check for ignition from the pilot to the main burner, through-ignition and a regular flame pattern. ascobloc Gastro-Gerätebau GmbH D-01156 Dresden, Grüner Weg 29 Germany Tel.
Always preheat the gas-fired roasting and baking oven before use. The gas-fired roasting/baking oven is thermostatically controlled. You can use the various levels in the gas-fired roasting/baking oven. Only use one insertion level at any one time. ascobloc Gastro-Gerätebau GmbH D-01156 Dresden, Grüner Weg 29 Germany Tel.
Clean the appliance thoroughly. Dry out the oven completely before the doors are closed. Disconnect the appliance from the mains. ascobloc Gastro-Gerätebau GmbH D-01156 Dresden, Grüner Weg 29 Germany Tel.
The appliance name plate is on the title page of this documentation and on the front panel A of the appliance (see connection diagram). ascobloc Gastro-Gerätebau GmbH D-01156 Dresden, Grüner Weg 29 Germany Tel.
Then loosen the screws under the control panel. Carefully remove the control panel. Avoid damaging the thermostat lines in appliances with oven! ascobloc Gastro-Gerätebau GmbH D-01156 Dresden, Grüner Weg 29 Germany Tel.
Change the ignition nozzle (G), a small cap fixed to the end of the ignition gas line, and screw on again. Once the conversion is completed, the appliance must be subjected to a complete test just as if it were an initial commissioning! ascobloc Gastro-Gerätebau GmbH D-01156 Dresden, Grüner Weg 29 Germany Tel.
Household and similar electrical appliances - Safety - Part 1: General requirements DIN EN 55014-1:2012-05 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission ascobloc Gastro-Gerätebau GmbH D-01156 Dresden, Grüner Weg 29 Germany Tel. +49 351 4533-0...
Page 17
The following national or international standards (or parts/clauses thereof) and specifications were applied: DIN 18851:2003-06 Equipment for commercial kitchens - Ranges - Requirements and testing Dresden, 23.05.2013 p.p. R. Ziegler Technical Director ascobloc Gastro-Gerätebau GmbH D-01156 Dresden, Grüner Weg 29 Germany Tel. +49 351 4533-0 Fax: +49 351 4537-339 E-mail: service@ascobloc.de...
Need help?
Do you have a question about the ASCOLINE 700 Series and is the answer not in the manual?
Questions and answers