Disassembly Of The Parts - Panasonic CU-PC9CKV Service Manual

10 Disassembly of the parts

• • • • Indoor Electronic Controller Removal Procedures
1. Remove the intake grille and two caps and screws at the
bottom of the front grille. Then remove the front grille by
releasing the 2 hooks at the top of the front grille. (See
Fig 1)
2. Remove the control board cover by releasing the 2 tabs
at left and 2 tabs at right side of the control board cover.
(Refer to Fig 2).
3. Release CN-FB , CN-TH, CN-STM connectors on the
electronic controller and CN-DISP on the indicator, CN-
RCV on the receiver. (see , Fig 3)
4. Pull the electronic controller outward gently by releasing
the tab on the right side. ( Fig 3)
5. Releasing the CN-FM connector and AC(WHT) wire and
two connecting wires on RY-PWR and the electronic
controller can be replaced. ( Fig 4)
43
CS-PC9CKV CU-PC9CKV / CS-PC12CKV CU-PC12CKV
Fig 1
Fig 2
Fig 3
Fig 4