QUAD PA-One Owner's Manual page 14

SOFTWARE INSTALLATION INSTRUCTIONS
Windows 8 / 7/ Vista / XP System setup
After successful installation of the driver please connect the USB Audio device to a free USB port.
Do not use a USB-hub! Close all other USB applications if you want to listen to music with your computer. The QUAD Audio
Driver replaces the internal soundcard of your computer.
Adjusting the sample rate
1 Open the control panel of your computer.
2 Open Sound.
3 If the QUAD Audio is not set as default, please set it to default as shown.
4 Under properties select Advanced and adjust the output format as required
Note: Windows Vista does not support the sample rate of 176.4kHz/24 bit. If you want to playback this sample state, a music
player supporting this feature is required. You can use J.River media Center of Foobar for example.
Windows XP does not support sample rates of more than 48kHz. You need a special music player to play back other sample
rates, for example J.River media Center of Foobar.
1
2
3
5 .

4
5