Sony STR-DA3200ES Operating Instructions Manual page 116

3
Referring to the table below,
press the input button for the
category you want.
The indicator turns off when a valid
button is pressed.
Example: Press DVD once.
4
Press SOURCE.
The new assignment is registered.
The indicator slowly lights up twice, then
goes off.
To cancel
Press RM SET UP during any step.
Tip
If the operation is unsuccessful, the indicator flashes
four times and the remote automatically exits the
button assignment mode. In this case, the new
assignment is not registered and the previous setting
remains.
Notes
• If you do not press a button during step 2 through 4
within 60 seconds, the remote automatically exits
the button assignment mode. Start again from step
1.
• In step 3, if you press the same button more than
the possible number of categories that can be
selected, only the last category is registered for the
new assignment.
Valid buttons and the
corresponding categories
Corresponding
categories
VTR-1
VTR-2
VTR-3
VTR-4
VTR-5
VTR-6
DVD player
LD player
TV
116
GB
Press
VIDEO 1 once
VIDEO 2 once
VIDEO 3 once
VIDEO 1 twice
VIDEO 2 twice
VIDEO 3 twice
DVD once
DVD twice
TV/SAT once
Corresponding
categories
SAT
Tape deck-A
Tape deck-B
MD deck
DAT deck
CD player-1
CD player-2
CD player-3
VIDEO CD player VIDEO 1, then SA-CD/
To clear all remote button
assignments
Hold down RM SET UP, then press ?/1.
The remote is reset to its factory-settings.
Press
TV/SAT twice
TAPE once
TAPE twice
MD/DAT once
MD/DAT twice
SA-CD/CD once
SA-CD/CD twice
SA-CD/CD three times
CD