Adjustments Using The Set Up Button - Sony STR-DA5ES Primary Operating Instructions Manual

Adjustments using the
SET UP button
The SET UP button allows you to make the
following adjustments.
1
Press SET UP.
2
Press the cursor buttons (
select the parameter you want to
adjust.
3
Turn the jog dial to select the setting
you want.
The setting is entered automatically.
4
Repeat steps 2 and 3 until you have set
all of the parameters that follow.
Initial settings
Parameter
6.1CH DECODING
MULTI CH 1 or 2
D.POWER
V.POWER
S.FIELD LINK
DECODE FORMAT
AUTO FUNCTION
2ND ROOM SP
3RD ROOM SP
2 WAY REMOTE
COMMAND MODE
T.TONE
OSD
OSD H.POSITION
OSD V.POSITION
1)
When the SPEAKER switch is set to "MAIN+2ND
ROOM" only. (STR-DA3ES only)
2)
When the SPEAKER switch is set to "MAIN+3RD
ROOM" only. (STR-DA5ES only)
3)
STR-DA5ES only.
48
or
Initial setting
AUTO
NONE
AUTO OFF
AUTO OFF
ON
AUTO
ON
1) ON
2)
ON
3)
ON
AV1
NORMAL
COLOR
4
4
x 6.1ch decoding mode (6.1CH
DECODING)
You can set this parameter using 6.1CH
DECODING on the front panel (page 34).
• When set to "AUTO", the receiver performs
6.1 channel decoding only if 6.1 channel signals
decode flag is ON.
• When set to "ON", the receiver performs
6.1 channel decoding only if the surround
) to
signals are multi channel format [3/2], [3/2+1]
or [3/3], regardless of the 6.1 channel decode
flag.
• When set to "OFF", the receiver does not
perform 6.1 channel decoding.
Tip
The 6.1 channel decoding flag is the information
recorded on the software (DVD, etc).
x Multi channel assignment
(MULTI CH 1 or 2)
Lets you assign a function to MULTI CH 1 or
2. You cannot assign TUNER or PHONO.
You cannot assign the same function to both
MULTI CH 1 and 2.