Using The Sleep Timer; Selecting The Speaker System - Sony STR-DA3000ES Operating Instructions (STRDA3000ES) Operating Instructions Manual

Using the Sleep Timer

You can set the receiver to turn off automatically
at a specified time by using the remote.
For details, refer to the operating instructions
supplied with the remote.
RM-LJ312:
Select SLEEP from the RECEIVER menu,
then press the key repeatedly while the
power is on.
RM-LG112:
Press ALT, then press SLEEP repeatedly
while the power is on.
Each time you select or press SLEEP, the
display changes cyclically as follows:
2:00:00 t 1:30:00 t 1:00:00 t 0:30:00 t
OFF
While using Sleep Timer, "SLEEP" lights up in
the display.
Tip
To check the remaining time before the receiver turns
off, select SLEEP from the RECEIVER menu (RM-
LJ312) or press ALT, then press SLEEP (RM-LG112).
The remaining time appears in the display.
GB
50
Selecting the speaker
system
Set the SPEAKERS switch according to the
front speakers you want to drive.
Set to To select
A The speakers connected to the FRONT
SPEAKERS A terminals.
B The speakers connected to the FRONT
SPEAKERS B terminals.
A+B The speakers connected to both the
FRONT SPEAKERS A and B terminals
(parallel connection).
OFF No speaker output.