Sony STR-DA3000ES Operating Instructions (STRDA3000ES) Operating Instructions Manual page 10

Hooking up a CD/Super Audio CD player or MD/DAT deck
For details on the required cords (A–H), see page 7.
CD/Super Audio
CD player
A
* Connect to either the CD/SACD COAXIAL IN or the CD/SACD OPTICAL IN jack. We recommend making
connections to the CD/SACD COAXIAL IN jack.
If you want to connect several digital components, but cannot find an
unused input
See "Assigning the audio input" (page 38).
Tips
• All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz and 96 kHz sampling frequencies.
• You can also connect an LD player with a DOLBY DIGITAL RF OUT jack via an RF demodulator (You cannot
connect an LD player's DOLBY DIGITAL RF OUT jack directly to this unit's digital input jacks). Refer to the
operating instructions supplied with the RF demodulator.
Notes
• No sound is output when playing a Super Audio CD disc on a Super Audio CD player connected to the CD/SACD
OPTICAL or COAXIAL IN jack on this receiver. Connect the player to the analog input jacks (CD/SACD IN
jacks). Refer to the operating instructions supplied with the Super Audio CD player.
• You cannot make digital recordings of digital multi channel surround signals.
GB
10
E F
* *
IMPEDANCE U
MD/DAT deck
E E A
IN OUT
OUT
COMPONENT VIDE
P /C P
R R
Y
L
R
A
IN
IDEO
N
DIO