Using Control S Control System - Sony STR-DA2000ES Operating Instructions (primary manual) Operating Instructions Manual

Using CONTROL S Control
System
(Models of area code U, CA only)
If you have a CONTROL S-compatible Sony
TV, satellite tuner, monitor, DVD player or
VCR, use a control S cord (not supplied) to
connect the CONTROL S IN (for TV, satellite
tuner, or monitor) or CONTROL S OUT (for
VCR, etc.) jack on the receiver to the
appropriate CONTROL S jack on the respective
component. Refer to the operating instructions
supplied with your TV, satellite tuner, monitor,
VCR, etc., for details.
If you connect the CONTROL S OUT jack on
another component to the CONTROL S IN
jack on this unit
Example
TV, VCR,
tuner,
monitor,
etc.
The remote sensor on the CONTROL S OUT
component receives remote codes the same way
as the remote sensor on this unit. This is useful
if you have placed this unit in a rack, etc.
GB
50
OUT
IN
Receiver
. >
-
m M
N X x
F
G g
f
O
Remote
If you connect the CONTROL S IN jack on
another component to the CONTROL S
OUT jack on this unit
Example
IN OUT IN OUT
TV
VCR
The remote sensor on this unit receives remote
codes the same way as the remote sensor on the
CONTROL S IN component. This is useful if
you place the other component away from this
unit.
IN
Tuner
OUT
Receiver
. >
-
m M
N X x
F
G g
f
O
Remote