Sony STR-DA2000ES Operating Instructions (primary manual) Operating Instructions Manual page 56

Separation
Frequency response
Selectivity
AM tuner section
Tuning range
STR-DA2000ES:
STR-DB2000:
Antenna
Usable sensitivity
S/N
Harmonic distortion
Selectivity
At 9 kHz:
At 10 kHz:
4) You can change the AM tuning scale to 9 kHz or 10
kHz. After tuning in any AM station, turn off the
receiver. While holding down PRESET TUNING +
or TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs/Outputs
Video:
S-video:
COMPONENT VIDEO:Y: 1 Vp-p, 75 ohms
General
Power requirements
Area code
U, CA
SP, CEL, CEK
Power consumption
Area code
U, CEL, CEK, SP
CA
Power consumption (during standby mode)
GB
56
45 dB at 1 kHz
30 Hz – 15 kHz,
+0.5/–2 dB
60 dB at 400 kHz
4)
530 – 1,710 kHz
(With 10-kHz tuning scale)
4)
531 – 1,710 kHz
(With 9-kHz tuning scale)
531 – 1,602 kHz
(With 9-kHz tuning scale)
Loop antenna
50 dB/m (at 1,000 kHz or 999
kHz)
54 dB (at 50 mV/m)
0.5% (50 mV/m, 400 Hz)
35 dB
40 dB
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
P /C /B-Y: 0.7 Vp-p, 75
B B
ohms
P /C /R-Y: 0.7 Vp-p, 75
R R
ohms
80 MHz HD Pass Through
Power requirements
120 V AC, 60 Hz
230 V AC, 50/60 Hz
Power consumption
170 W
300 VA
1 W
Dimensions 430 × 161 × 400 mm
including projecting parts and
controls
Mass (Approx.) 10 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
STR-DA2000ES:
Remote commander RM-LG112 (1)
R6 (size-AA) batteries (2)
STR-DB2000:
Remote commander RM-PP412 (1)
R6 (size-AA) batteries (2)
For details on the area code of the component you
are using, see page 3.
Design and specifications are subject to change
without notice.