Listening To The Sound In Another Zone; (Models Of Area Code U, Ca Only) - Sony STR-DA2000ES Operating Instructions (primary manual) Operating Instructions Manual

Listening to the sound in
another zone

(Models of area code U, CA only)

COMPONENT VIDEO
MONITOR
IN OUT
DEO S-VIDEO
VIDEO
TV-SAT
IN OUT
IN
VIDEO
IN OUT FRONT
EO 1
2ND PRE OUT
ZONE
CENTER SPEAKER
2ND ZONE
You can select analog audio signals for output to
the 2nd zone.
1
On the remote, press ?/1 while holding
down USE MODE.
2
Press v/V on the remote to select
"2ND".
The remote switches to the 2nd zone mode.
For details on the supplied remote, refer to
the operating instructions supplied with the
remote.
3
Turn on the main receiver (this
receiver).
4
Press ?/1 on the remote.
5
Press one of the input buttons on the
remote to select the source signals you
want to output.
The analog audio signals are output. When
you select "SOURCE", the signals of the
current input are output.
6
Turn on the amplifier in the 2nd zone
and adjust the volume.
Tips
• Even when this receiver is turned off, the receiver in
the 2nd zone remains turned on. To turn off all
receivers, press ?/1 and AV ?/1 on the remote at
the same time (SYSTEM STANDBY).
GB
48
Y
P /C
B B
/B-Y
P /C
R R
/R-Y
DVD MONITOR
IR REMOTE RS232C
IN OUT
TRIGGER OUT OUT IN
R L
A
R L
B
FRONT SPEAKERS
• Only signals from components connected to the
analog input jacks are output through the 2ND ZONE
OUT jacks. No signals are output from components
connected to only the digital input jacks.
• When "SOURCE" is selected, the signals input to the
MULTI CH INPUT (1, 2) jacks are not output from
the 2ND ZONE OUT jacks even when MULTI CH
INPUT (1, 2) is selected. The analog audio signals of
the current function are output.
2nd zone connections
Main receiver
Audio/video components
AC
SUB
WOOFER
AUDIO
OUT
2nd zone
Speaker
STR-DA2000ES
STR-DB2000
2ND
ZONE
IR repeater
OUT
(not supplied)
Speaker
Amplifier/Receiver
IR repeater
(not supplied)
Remote
. >
-
m M
N X x
F
G g
f
O